Stove Fan, Lacyie Silent Heat Powered Fan with 4 ...

Features:1. It can be adjusted automatically: the fireplace fan can be started automatically, and the speed can be adjusted according to the temperature of the furnace.2. low energy consumption:low consumption, high efficiency, can increase the room temperature by 41%, fuel cost savings of up to 16%, no battery or power supply,more environmentally friendly.3.Heat powered Fan for stove do not use batteries or electricity to increase the heating efficiency of your stove This allows the warm air to flow through your room faster. Specification:Color: BlackAirflow:

Features:
1. It can be adjusted automatically: the fireplace fan can be started automatically, and the speed can be adjusted according to the temperature of the furnace.
2. low energy consumption:low consumption, high efficiency, can increase the room temperature by 41%, fuel cost savings of up to 16%, no battery or power supply,more environmentally friendly.
3. powered Fan for  do not use batteries or electricity to increase the heating efficiency of your  This allows the warm air to flow through your room faster.

Specification:
Color: Black
Airflow: 203CFM
Model NO: BZ-01
Noise level:15-18db
Material: Aluminum
Start temperature:40℃
Working temperature:60-370℃
Recommended distance:10-15CM
Power Supply equipment:Thermoelectric module (Heat powered)

Working Principle:
Heat powered stove fans use thermoelectric technology to convert temperature differences into electricity in the center of the fan there is a unique thermoelectric module when heated, the module creates hot and cold silds, causing electrons to flow into the module and generate electricity to operate the fan. This is also called the Seebeck effect.

Attention:
1.Please keep fan away from children when in use.
2.The Heat powered stove Fans does not bring direct temperature increase but only a tool to accelerate the heat transfer of the chimney.
3.Never handle the base of the stove fan, do not set the stove fan down on an unprotected surface when hot. To move or carry the fan, always use the extendable handle while wearing gloves.
4.Please DO NOT place the fan in of the chimney or near the chimney, the temperature around chimney pipe is very high, it may cause damage of your fan. The optimum position is at the side or back part of the stove top.
5.Remove the fan from the stove if the temperature exceeds 698°F, or it may damage the fan and the electricity generating unit

Product Features

  • 【Heat Powered】Thermoelectric module acts as a small generator to power the fan’s motor. Low consumption, high efficiency, can increase the room temperature by 41%, fuel cost savings of up to 16%, no battery or power supply, more environmentally friendly.
  • 【Start Automatically】The heat powered stove fan is designed to circulate the warm air created by a wood/coal or pellet burning. Efficiently circulates warm air throughout the room. Just place the stove fan on a smooth flat surface of your stove top, near the side or back of the stovepipe. Need to place stove fan at least 4″ away from the stovepipe.Stove operating with normal surface temperatures between 140°F(60°C) and 698°F(370°C).
  • 【Whisper Quiet】4-Blade increases 80% more warm air than 2 blades, Larger Air Volume, Lower noise. You don’t even know the stove fan is there, but you feel the warmth! You will enjoy the warm air in a quiet and comfortable environment.
  • 【Safty Design】: The fireplace fans can withstand 370C(698F) high temperature, full oxidation of the fuselage, high temperature does not change color. There is high-temperature protection shrapnel at the bottom, If the surface temperature rises above around 572°F (300°C), the safety device gently elevates the front of the fan to protect the TEG and motor.
  • 【Maintenance Free】: Just dust it off occasionally, and put some oil on the blade shaft to keep it spinning smoothly and quietly.

Comments

Anonymous says:

Great I admit I was sceptical about this device, but bought on the recommendation of a friend. Our wood-burner is in a recessed fireplace. Sitting on top of the stove, the fan starts up soon after lighting the fire, and it really does blow warm air into the room! We did have to experiment with the positioning, but it is now in the optimum position. Very quiet, you soon forget it’s there. After a week’s use, I’m very satisfied, and might even buy a second one to boost the output.

Anonymous says:

Powerful and silent fan Very silent and powerful fan. Have tried it the other night and it blows a lot of warm air around the room. It also looks very smart in all black

Anonymous says:

Hot hot hot Wow, what a difference this has made. It distributes the heat so well around the rooms near my log burning stove. I don’t know why iv waited so long to buy one I would highly recommend getting one.

Write a comment

*

%d bloggers like this: